Click to enlarge

MX 1~10k

The MX UPS is an online double conversion UPS available from 1kVA to 10kVA with an output power factor 1. It is designed to provide continuous utility power protection for critical system installation. The MX series has USB and RS-232 communication ports as standard, with a built-in intelligent slot for optional protocol converters (e.g. SNMP…). The MX Series is the best solution for different applications: data centers, servers and networking devices, control systems, video surveillance systems…

Best Suited for: Banking, financial and insurance, data center, education, healthcare, government.

DOCUMENTS & DOWNLOADS

LEAFLET

DOCUMENTS & DOWNLOADS

LEAFLET

DOCUMENTS & DOWNLOADS

LEAFLET
Description
  • True Online Double Conversion Design
  • Pure Sine Wave Output
  • Fully Digitized Microprocessor Control
  • DSP Technology
  • Output Power Factor 1
  • Active Input Power Factor Correction (PFC 0.99)
  • 50/60 Hz Frequency Converter
  • Wide Input Voltage Range
  • Cold Start Function (DC Power On)
  • Advanced Battery Management (ABM Technology)
  • Automatic Diagnostics & Battery Check
  • High Overload Capability and Enhanced Short Circuit Protection
  • Eco Mode For Energy Saving
  • Isolation Transformer*
  • Programmable Power Management Outlets
  • Multi-Function LCD Display

 * Optional Features

DOCUMENTS & DOWNLOADS

LEAFLET
Specifications
 
 
ModelMX 1k
 
Input 
Rating
Voltage
Frequency
Voltage range
Power Factor
THDi
1000VA
220V, 230V, 240V, 1Ø 2Wires
40Hz~70Hz
160-300 VAC at 100% load, 110-300 VAC at 50% load
>99%
≤3%
 
Ouput 
Output Power with cosφ=1
Voltage (on battery)
Frequency (on battery)
Transfer Time
UPS Design Technology
Output Wave Form
Total Harmonic distortion (THD)
Crest Factor
1000W
220V, 230V, 240V, +/-1% (selectable output voltage), 1Ø 2Wires
50/60 Hz +/-0.1Hz
0 ms
Online double conversion design
Pure Sinewave
≤2% (linear load), ≤4% (non linear load)
3:1
 
Efficiency 
AC Mode
Battery Mode
95%
93%
 
Protection 
Overload Protection
Short Circuit Protection
110% for 10min, 130% for 1min, >130% for 3sec
UPS output cut off immediately using input fuse/circuit breaker protection
 
System Display 
LCD indicators
UPS status, load level, battery level, input/output voltage, discharge time and fault indicators
 
Alarm 
Battery mode
Low battery
Overload
Fault
Sounding every 4 second
Sounding every second
Sounding twice every second
Continuously sounding
 
Battery 
Battery Type
Typical Recharge Time
Charging Current
DC Voltage
Back up time(1/2 Load)
12V 7Ah
4 hours to 90% capacity
1.5A
36 VDC
10~15 min depending on load
 
Communication 
USB, RS-232, AS-400**
SNMP**
Compatibility
Interface with power management software
Power Management from SNMP manager and web browser
Supports Windows family, Linux, Unix and Mac
 
Physical 
Dimension, WxDxH mm
Net Weight Kgs(lbs)
145 X 397 X 220
12.5 (27.5lbs)
 
Environment 
Ambient operation
Audible noise
Maximum elevation at 1000m, 0 to 40°C, 20 to 95% humidity (non-condensing)
<50dBA at 1 Meter
 
Standards & Certifications 
Performance
Safety
EMC (EMS / EMI)
Design, production, & services
Environment
Marking & Certifications
EN50091-3/IEC 62040-3
UL 1778, CE, EN 50091-1,EN 60950 (RD/), IEC 60950
IEC 61000-4-2/-3/-4/-5/-6/-8/-11, IEC 61000-3-2/-3,FCC Part 15, CISPR 22, EN 50091-2/IEC62040-2 Class A, EN 55022/B,FCC 47 part 15 - Subpart B -
ISO 9001
ISO 14001 certified company
CE, TUV/GS, UL, cUL, c-Tick
 

* NOTE 1: Derate to 60% of capacity in CVCF mode and to 90% when the output voltage is adjusted to 208VAC.

NOTE 2: If the UPS is installed or used in a place where the altitude is above than the rated altitude, the output power must be derated one percent per 100m.

** For optional features
***Product specifications are subject to change without further notice

 
 
 
 
ModelMX 2k
 
Input 
Rating
Voltage
Frequency
Voltage range
Power Factor
THDi
2000VA
220V, 230V, 240V, 1Ø 2Wires
40Hz~70Hz
160-300 VAC at 100% load, 110-300 VAC at 50% load
>99%
≤3%
 
Ouput 
Output Power with cosφ=1
Voltage (on battery)
Frequency (on battery)
Transfer Time
UPS Design Technology
Output Wave Form
Total Harmonic distortion (THD)
Crest Factor
2000W
220V, 230V, 240V, +/-1% (selectable output voltage), 1Ø 2Wires
50/60 Hz +/-0.1Hz
0 ms
Online double conversion design
Pure Sinewave
≤2% (linear load), ≤4% (non linear load)
3:1
 
Protection 
Overload Protection
Short Circuit Protection
110% for 10min, 130% for 1min, >130% for 3sec
UPS output cut off immediately using input fuse/circuit breaker protection
 
Efficiency 
AC Mode
Battery Mode
95%
94%
 
System Display 
LCD indicators
UPS status, load level, battery level, input/output voltage, discharge time and fault indicators
 
Alarm 
Battery mode
Low battery
Overload
Fault
Sounding every 4 second
Sounding every second
Sounding twice every second
Continuously sounding
 
Battery 
Battery Type
Typical Recharge Time
Charging Current
DC Voltage
Back up time(1/2 Load)
12V 7Ah
4 hours to 90% capacity
1.5A
72VDC
10~15 min depending on load
 
Communication 
USB, RS-232, AS-400**
SNMP**
Compatibility
Interface with power management software
Power Management from SNMP manager and web browser
Supports Windows family, Linux, Unix and Mac
 
Physical 
Dimension, WxDxH mm
Net Weight Kgs(lbs)
190 X 421 X 318
25.8 (57lbs)
 
Environment 
Ambient operation
Audible noise
Maximum elevation at 1000m, 0 to 40°C, 20 to 95% humidity (non-condensing)
<50dBA at 1 Meter
 
Standards & Certifications 
Performance
Safety
EMC (EMS / EMI)
Design, production, & services
Environment
Marking & Certifications
EN50091-3/IEC 62040-3
UL 1778, CE, EN 50091-1,EN 60950 (RD/), IEC 60950
IEC 61000-4-2/-3/-4/-5/-6/-8/-11, IEC 61000-3-2/-3,FCC Part 15, CISPR 22, EN 50091-2/IEC62040-2 Class A, EN 55022/B,FCC 47 part 15 - Subpart B -
ISO 9001
ISO 14001 certified company
CE, TUV/GS, UL, cUL, c-Tick
 
* NOTE 1: Derate to 60% of capacity in CVCF mode and to 90% when the output voltage is adjusted to 208VAC.
NOTE 2: If the UPS is installed or used in a place where the altitude is above than the rated altitude, the output power must be derated one percent per 100m.
** For optional features
***Product specifications are subject to change without further notice
 
 
ModelMX 3k
 
Input 
Rating
Voltage
Frequency
Voltage range
Power Factor
THDi
3000VA
220V, 230V, 240V, 1Ø 2Wires
40Hz~70Hz
160-300 VAC at 100% load, 110-300 VAC at 50% load
>99%
≤3%
 
Ouput 
Output Power with cosφ=1
Voltage (on battery)
Frequency (on battery)
Transfer Time
UPS Design Technology
Output Wave Form
Total Harmonic distortion (THD)
Crest Factor
3000W
220V, 230V, 240V, +/-1% (selectable output voltage), 1Ø 2Wires
50/60 Hz +/-0.1Hz
0 ms
Online double conversion design
Pure Sinewave
≤2% (linear load), ≤4% (non linear load)
3:1
 
Protection 
Overload Protection
Short Circuit Protection
110% for 10min, 130% for 1min, >130% for 3sec
UPS output cut off immediately using input fuse/circuit breaker protection
 
Efficiency 
AC Mode
Battery Mode
95%
94%
 
System Display 
LCD indicators
UPS status, load level, battery level, input/output voltage, discharge time and fault indicators
 
Alarm 
Battery mode
Low battery
Overload
Fault
Sounding every 4 second
Sounding every second
Sounding twice every second
Continuously sounding
 
Battery 
Battery Type
Typical Recharge Time
Charging Current
DC Voltage
Back up time(1/2 Load)
12V 9Ah
4 hours to 90% capacity
1.5A
72VDC
10~15 min depending on load
 
Communication 
USB, RS-232, AS-400**
SNMP**
Compatibility
Interface with power management software
Power Management from SNMP manager and web browser
Supports Windows family, Linux, Unix and Mac
 
Physical 
Dimension, WxDxH mm
Net Weight Kgs(lbs)
190 X 421 X 318
27 (60lbs)
 
Environment 
Ambient operation
Audible noise
Maximum elevation at 1000m, 0 to 40°C, 20 to 95% humidity (non-condensing)
<50dBA at 1 Meter
 
Standards & Certifications 
Performance
Safety
EMC (EMS / EMI)
Design, production, & services
Environment
Marking & Certifications
EN50091-3/IEC 62040-3
UL 1778, CE, EN 50091-1,EN 60950 (RD/), IEC 60950
IEC 61000-4-2/-3/-4/-5/-6/-8/-11, IEC 61000-3-2/-3,FCC Part 15, CISPR 22, EN 50091-2/IEC62040-2 Class A, EN 55022/B,FCC 47 part 15 - Subpart B -
ISO 9001
ISO 14001 certified company
CE, TUV/GS, UL, cUL, c-Tick
 
* NOTE 1: Derate to 60% of capacity in CVCF mode and to 90% when the output voltage is adjusted to 208VAC.
NOTE 2: If the UPS is installed or used in a place where the altitude is above than the rated altitude, the output power must be derated one percent per 100m.
** For optional features
***Product specifications are subject to change without further notice
 
 
ModelMX 6k
 
Input 
Rating
Voltage
Frequency
Voltage range
Power Factor
THDi
6000VA
220V, 230V, 240V, 1Ø 2Wires
40Hz~70Hz
160-300 VAC at 100% load, 110-300 VAC at 50% load
>99%
≤3%
 
Ouput 
Output Power with cosφ=1
Voltage (on battery)
Frequency (on battery)
Transfer Time
UPS Design Technology
Output Wave Form
Total Harmonic distortion (THD)
Crest Factor
6000W
220V, 230V, 240V, +/-1% (selectable output voltage), 1Ø 2Wires
50/60 Hz +/-0.2%
0 ms
Online double conversion design
Pure Sinewave
≤3% (linear load), ≤5% (non linear load)
3:1
 
Protection 
Overload Protection
Short Circuit Protection
110% for 10min, 130% for 1min, >130% for 1sec
UPS output cut off immediately using input fuse/circuit breaker protection
 
Efficiency 
AC Mode
Battery Mode
>95%
>94%
 
System Display 
LCD indicators
UPS status, load level, battery level, input/output voltage, discharge time and fault indicators
 
Alarm 
Battery mode
Low battery
Overload
Fault
Sounding every 4 second
Sounding every second
Sounding twice every second
Continuously sounding
 
Battery 
Battery Type
Typical Recharge Time
Charging Current
DC Voltage
Back up time(1/2 Load)
12V 7Ah
6 hours to 90% capacity
1A
240VDC
10~15 min depending on load
 
Communication 
USB, RS-232, AS-400**
SNMP**
Compatibility
Interface with power management software
Power Management from SNMP manager and web browser
Supports Windows family, Linux, Unix and Mac
 
Physical 
Dimension, WxDxH mm
Net Weight Kgs(lbs)
250 x 592 x 576
81 (178.2lbs)
 
Environment 
Ambient operation
Audible noise
Maximum elevation at 1000m, 0 to 40°C, 0 to 95% humidity (non-condensing)
<55dBA at 1 Meter
 
Standards & Certifications 
Performance
Safety
EMC (EMS / EMI)
Design, production, & services
Environment
Marking & Certifications
EN50091-3/IEC 62040-3
UL 1778, CE, EN 50091-1,EN 60950 (RD/), IEC 60950
IEC 61000-4-2/-3/-4/-5/-6/-8/-11, IEC 61000-3-2/-3,FCC Part 15, CISPR 22, EN 50091-2/IEC62040-2 Class A, EN 55022/B,FCC 47 part 15 - Subpart B -
ISO 9001
ISO 14001 certified company
CE, TUV/GS, UL, cUL, c-Tick
 
* NOTE 1: Derate to 60% of capacity in CVCF mode and to 90% when the output voltage is adjusted to 208VAC.
NOTE 2: If the UPS is installed or used in a place where the altitude is above than the rated altitude, the output power must be derated one percent per 100m.
** For optional features
***Product specifications are subject to change without further notice
 
 
 
 
ModelMX 10k
 
Input 
Rating
Voltage
Frequency
Voltage range
Power Factor
THDi
10000VA
220V, 230V, 240V, 1Ø 2Wires
40Hz~70Hz
160-300 VAC at 100% load, 110-300 VAC at 50% load
>99%
≤3%
 
Ouput 
Output Power with cosφ=1
Voltage (on battery)
Frequency (on battery)
Transfer Time
UPS Design Technology
Output Wave Form
Total Harmonic distortion (THD)
Crest Factor
10000W
220V, 230V, 240V, +/-1% (selectable output voltage), 1Ø 2Wires
50/60 Hz +/-0.2%
0 ms
Online double conversion design
Pure Sinewave
≤3% (linear load), ≤5% (non linear load)
3:1
 
Protection 
Overload Protection
Short Circuit Protection
110% for 10min, 130% for 1min, >130% for 1sec
UPS output cut off immediately using input fuse/circuit breaker protection
 
Efficiency 
AC Mode
Battery Mode
>96%
>95%
 
System Display 
LCD indicators
UPS status, load level, battery level, input/output voltage, discharge time and fault indicators
 
Alarm 
Battery mode
Low battery
Overload
Fault
Sounding every 4 second
Sounding every second
Sounding twice every second
Continuously sounding
 
Battery 
Battery Type
Typical Recharge Time
Charging Current
DC Voltage
Back up time(1/2 Load)
12V 9Ah
6 hours to 90% capacity
1A
240VDC
10~15 min depending on load
 
Communication 
USB, RS-232, AS-400**
SNMP**
Compatibility
Interface with power management software
Power Management from SNMP manager and web browser
Supports Windows family, Linux, Unix and Mac
 
Physical 
Dimension, WxDxH mm
Net Weight Kgs(lbs)
250 x 592 x 576
83 (182.6lbs)
 
Environment 
Ambient operation
Audible noise
Maximum elevation at 1000m, 0 to 40°C, 0 to 95% humidity (non-condensing)
<58dBA at 1 Meter
 
Standards & Certifications 
Performance
Safety
EMC (EMS / EMI)
Design, production, & services
Environment
Marking & Certifications
EN50091-3/IEC 62040-3
UL 1778, CE, EN 50091-1,EN 60950 (RD/), IEC 60950
IEC 61000-4-2/-3/-4/-5/-6/-8/-11, IEC 61000-3-2/-3,FCC Part 15, CISPR 22, EN 50091-2/IEC62040-2 Class A, EN 55022/B,FCC 47 part 15 - Subpart B -
ISO 9001
ISO 14001 certified company
CE, TUV/GS, UL, cUL, c-Tick
 
* NOTE 1: Derate to 60% of capacity in CVCF mode and to 90% when the output voltage is adjusted to 208VAC.
NOTE 2: If the UPS is installed or used in a place where the altitude is above than the rated altitude, the output power must be derated one percent per 100m.
** For optional features
***Product specifications are subject to change without further notice

Related products

M8 Series

,

MXL 1~10k

,

MXL31 10~20K

,

MXL33 10~60k

,

VX 1~10K

,

MXRM 1~10K

,

MX33 10~40k

,

MXRM31 10~20K

,